Tracer-4210A MPPT Solar Charge Controller 40A
Category: MPPT Controller   Publish Time: 2015-10-28 00:24 

Tracer-4210A MPPT Solar Charge Controller 40A
Tracer-A series is based on common positive design and advanced MPPT control algorithm, with LCD displaying running status, this product is artistic, economical and practical. With MPPT control algorithm, in any situation, products of this series can fast and accurately track out the best maximum power point (MPPT) of photovoltaic array, in order to obtain the maximum solar energy in time, which remarkably improves energy efficiency. There is dual display function: local LCD panel or remote meter (needs extra MT50). With Modbus communication protocol interface, it is convenient for customers to expand applications and monitor in various fields like telecommunication base station, household system, street lighting system, wilderness monitoring system, etc. All-round electronic fault self-test function and enhanced electronic protection function could furthest avoid damages on system components resulting from installation errors or system failures.

Features:

Ÿ Advanced Maximum Power Point Tracking (MPPT) technology, with efficiency no less than 99.5%.

Ÿ High quality components, perfecting system performance, with maximum conversion efficiency of 98%.

Ÿ Ultra-fast tracking speed and guaranteed tracking efficiency.

Ÿ Accurately recognizing and tracking of multiple power points.

Ÿ Reliable automatic limit function of maximum PV input power, ensuring no overload under any circumstance.

Ÿ Wide MPP operating voltage range.

Ÿ 12/24VDC automatically identifying system voltage.

Ÿ LCD panel display design, dynamically displaying tool’s operating data and working condition.

Ÿ Multiple load control modes: manual control, light ON/OFF, light On+Timer and test mode.

Ÿ Support 3 charging preprogram options: Sealed, Gel, Flooded. 

Ÿ Battery temperature compensation function.

Ÿ Real-time energy statistics function.

Ÿ With RS-485 communication bus interface and Modbus communication protocol, it is available to meet various communication requirements in different situations.

Ÿ Available for network module (eBox--01) with protocol TCP/UDP/SNMP, to realize connection to internet.

Ÿ Available for PC monitoring and external display unit connecting like MT50 and so on, realizing real-time data checking and parameters setting.

Ÿ Support software upgrade.




Electronic protections:

 PV reverse polarity protection               

 PV short circuit protection

 PV over current alarm protection           

 Battery overcharge protection                

 Battery over discharge protection          

 Battery reverse polarity protection             

 Load short circuit protection                   

 Load overload protection





1 –Mounting hole sizeΦ5

2 –Select Button

3 –Connection for a RTS (Remote Temperature Sensor) to remotely detect battery temperature.

4 –Solar Module TerminalsConnect solar modules.

5 –Battery TerminalsConnect batteries.

6 –Load TerminalsConnect loads.

7 –RS-485 Port (RJ45 interface)Connect with PC or MT50 to monitor or update firmware.

8 –Product shell

9 –Enter Button

10 – LCD


Technical Specifications

 Electrical Parameters


Description

Parameter

Nominal system voltage

12VDC / 24VDC Auto work

Rated charge current

Tracer4210A  40A

Rated discharge current

Tracer4210A   40A

Battery voltage range

9V~32V

Max. solar input voltage

100VDC

MPPT voltage range

VBAT +2V90V (Voc. less than 100V)

Max. PV input power

Tracer2210A 520W(12V) 1040W(24V)

Self-consumption*

20mA(12V)  16mA(24V)

Temperature compensate coefficient

-3mV/ºC/2V(default)

Communication

RS485(RJ45 interface)


• Environmental Parameters

Environmental

Parameter

LCD temperature range

-20to +70

Ambient temperature range

-25to +45

Storage temperature range

-35℃ to +80℃

Humidity range

95%(NC)

Enclosure

IP30





Annex I Conversion Efficiency Curves

 Illumination Intensity: 1000W/m2   Temp: 25ºC

Model: Tracer4210A

Solar Module MPP Voltage (17V, 34V, 68V) / Nominal System Voltage(12V)




Solar Module MPP Voltage (34V, 68V) / Nominal System Voltage(24V)





 
 
QQ  Shirley
QQ  Eric
MSN  Shirley
MSN  Eala
MSN  shtepower02