89
78
1
25
60
67
45
14
16
20
24
52
58
38
17
82
93
96
6
65
260W Grid-tie Inverter With Waterproof TEG-260W-IP65--Inverter & Charger Controller -Shanghai Tingen Electric Co.,ltd.
260W Grid-tie Inverter With Waterproof TEG-260W-IP65
Category: Waterproof Solar Grid   Publish Time: 2014-02-17 23:56 

260W Grid-tie Inverter With Waterproof  TEG-260W-IP65
IP65
 

models

TEG-260W-IP65

Recommend use solar panels

300Wpv

DC MAX input current

20A

AC MAX output power

260Watt

DC MAX Open-circuit input-voltage

100VDC

DC input voltage range

22~50VDC

MAX output power factor

0.99

DC input Reverse voltage protection

FUSE

AC output voltage range

120V versions 90~160VAC)(230V versions 190~260VAC

AC frequency range

48~63Hz

Output current total harmonic distortion

THDIAC <5%

AC Phase

<0.5%

Islanding protection

VACf AC

Output short circuit protection

Current-limiting

Show

LED mode power instruction voltage instruction
AC frequency instruction over-voltage instruction

Communication way

60KHz modulationpower line carrier-current communication

Standby Power

<1W

Night Power

<1W

Ambient temperature range

-25 ~60

Humidity

0~100%(Indoor Type Design)

Waterproof

IP65

Electromagnetic Compatibility

EN50081.part1   EN50082.part1

Power System Disturbance

EN61000-3-2  EN62109

Network test

DIN VDE 1026 UL1741

Certificate

CE

 

 

System function

u  Power line carrier-current communication

By using electric power as a carrier of AC alternating current, can modulate high-frequency and carrier frequency (60KHz) in AC wire transmission and can achieve the communication/ newsletter between inverters or between inverter and computer. And it can transfer the power data and the brightness date of the sunshine in the real-time. Also monitor all functions of inverter.

1.      Carrier frequency60KHZFrequency customizable

2.      Interface wayTTL level serial interface

3.      Carrier rate300BPS

4.      Serial rate9600BPSCan customize according to
customer's request

5.      Modulation modeFSK+DSSS

6.      Newsletter distance400m

u  6-grade power search

In overcast weather, the solar battery’s output current is extremely tiny, then inverter will automatic open 6-grade power search function.

1.      The program can automatically open power adjustment for 6 times.

2.      The current direction can adjust from the maximum to the minimum.

3.      In automatic adjustment process, we will see the LOW light flashing. And the power will keep as a starting point, from 0 to the maximum output power, and it will restart at most for 6 times, then locked in the maximum power, the ST lamp long bright.

4. It need 10 minutes for 6-grade power search.

u  Wide voltage input(22-50VDC

Achieve wide voltage input.

1.      DC voltage input22-50VDC

2.      Second level power variable voltage conversion

u  High-frequency two-way and one-way grid function

1.      High frequency direct modulation, AC half wave synthesis

2.      Two-way grid means: Load consume directly. And can reverse AC current transmission.

u  Kinds of frequency output function.

1.      It can apply to 50Hz and 60Hz frequency of AC.

2.      Frequency range: 48Hz ~ 63Hz

u  directly connected to the solar panels (do not need to connect the battery)

Using precise Dynamic differential pressure type MPPT function, APL functions, the inverter automatically adjust the solar panels of maximum output powersimply connect the solar panel to the grid inverters. Do not need to connect the battery.

1.      Differential pressure type MPPT: 0.1 V accuracy

2.      Power lock: 10W (AC output)

u  AC 0 angle with high precision auto-detection

AC phase angle of 0 through isolation amplifier then input to the MCU for high-precision detection and analysis. The phase shift rate is less than 1%, thus achieve high-precision with phase modulation AC output together.

1.   AC phase shift: < 1%

2.   Over-zero protection: 0.2 VAC

3.   AC switching: 50Hz / 60Hz

u  Synchronous High-frequency Modulation

In the process of the grid, usually adapt the same phase angle in parallel. (ie, When the two-phase alternating current total is equal to 0.Use switch to combination the two AC fusion) and the product is rectified AC half-frequency AC to 100Hz first, then the machine use the high frequency current in the circuit and semi-100Hz frequency alternating current generated combination, to achieve high-frequency modulation.

1.   Modulation synthesis: half wave and full-bridge modulation synthesis (100Hz / 120Hz)

2.   Synthetic way: MOSFET full-bridge

3.   High frequency: 50KHz

u  Pure Sine Wave Output

Use SPWM directly to make pure sine wave output.

1.   Output waveform: Adopt complementary PWM to push-pull pure sine wave.

2.   Generate means: enhancement-mode SPWM

u  Automatic Sensing Function Solar Luminosity

Use the latest luminosity perception operation technology. The different illuminate angle and intensity of the solar panel will produce different current output. Use advanced CPU to operate the different intensity of illumination.

1.   Luminosity sampling point power sampling point

 

1.   High precision AD sampling: integral AD sampling method

u  Power Automatically Locked (APL)

In different current fluctuations, we should use the MPPT function. When the MPPT function adjusted to the maximum power point, the product automatically powers locked in maximum power point, then made the output power more stable.

1.   Power lock: The biggest sampling point of MPPT.

u  Automatically Adapt To Different Load

Adapt to any of the power load.

u  Constant Current, Constant Power

This product is constant current, constant output power, without any overload, over-current phenomenon.

u  Automatically Shut Down When The Power Grid Fault

When the city power system is in failure, the inverter will automatically turn off the output.

1.   Current Limit Protection

2.   Current limit

u    Stack Multiple Machines

Multiple small power inverters in parallel can achieve large output power.

u  High-Frequency High Conversion Rate

Adapt high frequency converter, the output more efficient.

u  Maximum Power Point Tracking (MPPT)

Because the current intensity and the voltage changes at any time, if there is no power point tracking, there will be a lot of problems. In the past time, usually adopt a solar controller, but this product uses high-precision (MPPT) operation power, automatic and immediate adjust the solar panels output power at the maximum output point, then achieve a stable output purposes. MPPT is for short of "Maximum Power Point Tracking". It means the controller can sense the voltage of the solar panels on time, and can track the highest voltage and current (VI).Then made the inverter discharge to power grid with the highest efficiency.

The peak voltage (Vpp) of the solar panels is about 38V when it in factory. And the environment temperature is 25 ° C. The reason of setting this temperature(interestingly, different from the subjective imagination, we ordinary people the conclusion may let us surprised) is that when the weather is very hot, solar panels’ peak voltage will fall to about 36 V while in cold weather, the peak voltage can achieve 43 V.

Now we back to contrast the difference of MPPT solar energy grid inverter and traditional inverter. The traditional solar inverter is a bit like the manual gearbox. When the engine speed increase, while the gearbox gear don't increase at the same time, it will definitely affect the speed of the car. For traditional inverter speaking, the parameter output power is been set in factory. It likes a car have been fixed set on fixed 1 gears, no matter how powerfully you trample accelerator, the speed of a car is limited. While have the MPPT function it will be different, it is automatically. It will automatically adjust the gears according to the engine’ speed, so it can make cars in the most gears in a reasonable efficiency standard operation. It means the MPPT controller can track the maximum power point of solar panels in real-time then express the biggest efficiency of solar panels. The higher the voltage, the more power can be output through the MPPT. Thus improve the charging efficiency. Theoretically speaking, using MPPT, the efficiency can be increased by 50% compared with the traditional inverter. But due to environmental impact and various around energy loss, the ultimate efficiency can improve 20%-30% according to our actual testing.

u  Stack using

In order to achieve higher power use requirements, this product can be stacked. Such as: 4 micro inverter of 260W stacking can achieve 1040W. And the number of the stacking is unlimited.  

u  DC input

Input voltage range: 22V to 50V

Solar Panel: Recommend using the power more than 30W and the standard voltage of 36V PV panels.

Recommend using multiple solar panels. Solar panel in series will result in high-input voltage which will exceed the working voltage range of the inverter.

u  AC output

Voltage range of the inverter whose output is 220V AC.: 190V - 260V50HZ

Voltage range of the inverter whose output is 110V AC.: 90V - 160V60HZ

---Please connect the inverter following the operation instruction show above. If have any question please contact with relative persons.

--- Non-professionals do not disassemble. Only qualified personnel may repair this product.

--- Please install inverter in the low humidity and well-ventilated place to avoid the inverter over-heating, and clear around the inflammable and explosive materials.

--- When using this product, avoid children touching, playing, to avoid electric shock.

--- Connected solar panels, battery or wind generators DC input DC power supply cable.

 

 
 
QQ  Shirley
QQ  Eric
MSN  Shirley
MSN  Eala
MSN  shtepower02